| Packet Forwarding |
|---|
| 802.1D-1999 Ethernet bridging; 802.11-.802.3 bridging; 802.1Q VLAN tagging and trunking; proxy ARP; IP packet steering-redirection |
| Wireless Networking |
|---|
| Wireless LAN | Supports 24 WLANs; multi-ESS/BSSID traffic segmentation; VLAN to ESSID mapping; auto assignment of VLANs (on RADIUS authentication); power save protocol polling; pre-emptive roaming; VLAN Pooling and dynamic VLAN adjustment; IGMP Snooping |
| Bandwidth management | Congestion control per WLAN; per user based on user count or bandwidth utilization; dynamic load balancing of AP 300s, AP 650s, and adaptive APs in a cluster;
bandwidth provisioning via AAA server |
| Layer 2 or Layer 3 deployment of thin access points and adaptive AP AP 51X1 802.11a/b/g and AP 7131 802.11a/b/g/n access points |
| Layer 3 Mobility (Inter-Subnet Roaming) |
| IPv6 client support |
| Thin Access Ports | Supports 6 802.11a/b/g AP 300 or 802.11a/b/g/n thin access points for L2 or L3 deployment per RFS 4000 controller and 72 AP 300s or AP 650s per cluster; Legacy support: AP100 for L2 deployments only |
| Adaptive AP | Supports adoption of 6 adaptive AP 51X1 802.11a/b/g and AP-7131 802.11a/b/g/n access points in adaptive mode per RFS 4000 Integrated Services Controller and
72 per cluster; multiple country configuration support; Legacy support: AP 4131 Access Point conversion for L2 deployments only |
| Power-over-Ethernet | Integrated; up to a maximum of 90 watts for simultaneous operation |
| Radio frequency automatic channel select (ACS); Transmit power control management (TPC); Country code-based RF configuration; 802.11b, 802.11g 802.11a, and 802.11n |
| Network Security |
|---|
| Role-based wired/wireless firewall (L2-L7) with stateful inspection for wired and wireless traffic; Active firewall sessions 50,000 per RFS 4000 Integrated Services Controller and 600,000 per cluster; protects against IP Spoofing and ARP Cache Poisoning |
| Access Control Lists (ACLs): L2/L3/L4 ACLs |
Wireless IDS/IPS | Multi-mode rogue AP detection, Rogue AP Containment, 802.11n Rogue Detection, Ad-Hoc
Network Detection, Denial of Service protection against wireless attacks, client blacklisting, excessive authentication/association; excessive probes; excessive disassociation/deauthentication; excessive decryption errors; excessive authentication failures; excessive 802.11 replay; excessive crypto IV failures (TKIP/CCMP replay); Suspicious AP, Authorized device in ad-hoc mode, unauthorized AP using authorized SSID, EAP Flood, Fake AP Flood, ID theft, ad-hoc advertising Authorized SSID |
| Geoforcing | Add location of users as a parameter that defines
access control to the network |
| WIPS sensor conversion | Supported on the AP 300, AP 650 and the Adaptive AP 5131 and AP 7131 |
Anomaly Analysis | Source Media Access Control (MAC) = Dest MAC; Illegal frame sizes; Source MAC is multicast; TKIP countermeasures; all zero addresses |
| Authentication | Access Control Lists (ACLS); pre-shared keys (PSK);
802.1x/EAPtransport layer security (TLS), tunneled
transport layer security (TTLS), protected EAP (PEAP);
Kerberos Integrated AAA/RADIUS Server with native
support for EAP-TTLS, EAP-PEAP (includes a built in
user name/password database; supports LDAP), and
EAP-SI |
| Transport Encryption: | WEP 40/128 (RC4), KeyGuard, WPATKIP, WPA2-
CCMP (AES), WPA2-TKIP |
| 802.11w: | Provides origin authentication, integrity, confidentiality
and replay protection of management frames for
Motorolas AP 300 access point |
| IPSec VPN gateway: | Supports DES, 3DES and AES-128 and AES-256
encryption, with site-to-site and client-to-site
VPN capabilities |
Secure guest access
(Hotspot provisioning) | Provides secure guest access for wired and wireless
clients. built-in captive portal, customizable login/
welcome pages, URL redirection for user login, usagebased charging, dynamic VLAN assignment of clients,
DNS white list, GRE tunneling of traffic to central site,
API support for interoperabilty with custom web portals
(e.g. Wandering WiFi), Amigopod, support for external
authentication and billing systems |
| Wireless RADIUS Support (Standard and Motorola Vendor Specific Attributes): | User BAsed VLANS (Standard)
MAC Based Authentication (Standard)
User Based QoS (Motorola VSA)
Location Based Authentication (Motorola VSA)
Allowed ESSIDs (Motorola VSA) |
| NAC support with third party systems from Microsoft, Symantec and Bradford |
| Real Time Locationing System (RTLS) |
|---|
| RSSI based triangulation for Wi-Fi assets |
| Tags supported: | Ekahau, Aeroscout, Gen 2 Tags |
| RFID Support: | Compliant with LLRP protocol. Built-in support for
the following Motorola RFID readers: fixed (XR440,
XR450, XR480; mobile (RD5000) and handheld
(MC9090-G RFID) |
| User Environment |
|---|
| RF Priority: | 802.11 traffic prioritization and precedenc |
| Wi-Fi Multimedia extensions | WMM=power save wieh TSPEC Admission Control; WMM U-APSD |
| IGMP Snooping: | Optimizes network performance by preventing flooding
of the broadcast domain |
| SIP Call Admission Control | Controls the number of active SIP sessions initiated
by a wireless VoIP phone |
| 802.11k | Provides radio resource management to improve client
throughput (11k client required) |
| Classification and marking: | Layer 1-4 packet classifcation; 802. 1p VLAN priority; DiffServ/TOS |
| System Resiliency and Redundancy |
|---|
Active:Standby; Active:Active and N+1 redundancy with access port and MU load
balancing; Critical resource monitoring |
Virtual IP: Single virtual IP (per VLAN) for a switch/contoller cluster to use as the
default gateway by mobile devices or wired infrastructure. Seamless fail-over of
associated services e.g. DHCP Server |
SMART RF: Network optimization to ensure user quality of experience at all times
by dynamic adjustments to channel and power (on detection of RF interference or
loss of RF coverage/neighbor recovery). Available for both thin APs and Adaptive
APs |
| Dual Firmware bank supports Image Failover capability |
| System Extensibility |
|---|
ExpressCard
Slot: | Driver support for 3G wireless cards for WAN backhaul |
- AT&T (NALA) Option GT Ultra Express
- Verizon (NALA) Verizon Wireless V740, V770 Express Cards
- Sprint (NALA) - Sprint Novatel Merlin C777 Express card
- Vodaphone (EMEA) Novatel Merlin XU870
- Vodaphone (EMEA) Vodaphone E3730 3G Expresscard
- Telstra (Australia) Telstra Turbo 7 series Expresscard (Aircard 880E)
- General Use (NALA/APAC) Novatel Merlin XU870
|
| Management |
|---|
| Command line interface (serial, telnet, SSH); secure Web-based GUI (SSL) for the wireless switch and the cluster; SNMP v1/v2/v3; SNMP traps40+ user configurable options; Syslog; Firmware, Config upgrade via TFTP, FTP & SFTP (clients); simple network time protocol (SNTP); text-based switch configuration files; DHCP (client/server/relay), switch auto-configuration and firmware updates with DHCP options; multiple user roles (for switch access); MIBs (MIB-II, Etherstats, wireless switch specific monitoring and configuration); Email notifications for critical alarms; MU naming capability |
| Physical Characteristics |
|---|
| Form factor: | 1U Rack Mount Tray available for the RFS4010
2U Rack Mount Tray available for the RFS4011 |
| Dimensions: | RFS 4010: 1.75 in. H x 12 in. W x 10 in. D
44.45 mm H x 304.8 mm W x 254.0 mm D
Antenna facade: 289.2mm x 340mm x20.5mm |
| Weight: | RFS 4010: 4.75 lbs./2.15 kg
RFS 4011: 4.9lbs
Antenna facade: 1.45lb |
| Physical interfaces: | 1x Uplink Port -10/100/1000 Cu/ Gigabit SFP interface
5x 10/100/1000 Cu Ethernet Ports, 802.3af and
802.3at Draft
1x USB 2.0 Host
1x ExpressCard
Slot
1x Serial Port (RJ45 style) |
| Antenna Connections: | RFS 4011: RP-SM |
| MTBF: | >65,000 Hours |
| Power Requirements |
|---|
| AC input voltage | 100-240 VAC 50/60Hz |
| Operating Voltage: | 44 to 57 VD |
| Operating Current | 2.5A(max) @48 VDC or 2.2A(max) @ 54 VD |
Max Power Consumption: | 120W for RFS 4010, 150W for RFS 4011 |
| User Environment |
|---|
| Operating Temperature: | 32 F to 104 F /0 C to 40 C |
| Storage Temperature: | -40 F to 158 F/-40 C to 70 C |
| Operating Humidity: | 5% to 85% (w/o condensation) |
| Storage Humidity: | 5% to 85% (w/o condensation) |
| Heat Dissipation: | 95 BTU/hr for RFS 4010, 190 BTU/hr for RFS 4011 |
| Max Operating Altitude: | 3000m |
| Regulatory |
|---|
| Product Safety: | UL / cUL 60950-1, IEC / EN60950-1 |
| EMC Compliance: | FCC (USA), Industry Canada, CE (Europe), VCCI (Japan),
C-Tick (Australia/New Zealand) |
Recommended Enterprise Mobility Service |
|---|
| Customer Services: | Service from the Start Advance Exchange Support |